LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2020 >> 3 Select, 2.5L Eng VIN L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Intake-Air System (VIN M)) >> Intake-Air System Removal/Installation >> Intake Manifold Installation Note

Intake Manifold Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Install the intake manifold.
  2. Connect the wiring harness clip to the intake manifold shown in the figure.
    G13108266Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals