LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2020 >> 3 Base, 4D Hatchback, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Cooling System (VIN L)) >> Coolant Reserve Tank Removal/Installation >> Notes

Coolant Reserve Tank Removal/Installation: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Remove the hose and coolant reserve tank cap as a single unit.
  2. Remove in the order indicated in the table.
  3. Install in the reverse order of removal.
    Fig 1: Coolant Reserve Tank Components With Torque Specification
    G13174825Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals