Headlight Leveling Actuator Operation Check Mode

Connect the M-MDS to the DLC-2.
Switch the ignition ON (engine off or on).
Turn on the headlights.
Perform the vehicle identification.
After vehicle identification, select in the following order from the M-MDS initial screen.
1. "Toolbox"
2. "Work Support"
3. "LIGHTING SYSTEMS"
4. "Simulation Testing for Headlight Leveling Actuator"
Verify that the headlight optical axis lowers from the current position and returns the original position after 2 s.
- If the headlight leveling actuator does not operate normally, replace the front combination light. (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION .)