Inspection using an oscilloscope (reference)

Courtesy of MAZDA MOTORS CORP.

• Terminal: D, F (+) ↔ ground (-)
• Oscilloscope setting: 2 V/DIV (Y), 1 ms/DIV (X), DC range

Auto-open/close Function for Driver-side

1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
2. Remove the power window subswitch. (See POWER WINDOW SUBSWITCH REMOVAL/INSTALLATION .)
3. Verify that the continuity between the power window subswitch terminals is as indicated in the table.

Courtesy of MAZDA MOTORS CORP.

• If not as indicated in the table, replace the power window subswitch.

Courtesy of MAZDA MOTORS CORP.