LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2019 >> CX-5 Touring, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Control System (VIN 2)) >> Regulating Valve Position Sensor Inspection >> PID/DATA Monitor Inspection

PID/DATA Monitor Inspection

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • The regulating valve position sensor is integrated in the regulating valve actuator. The regulating valve actuator is integrated in the turbocharger.
  1. Connect the M-MDS to the DLC-2.
  2. Switch the ignition ON (engine running).
  3. Access the PID/DATA monitor item REGVP and simulation item REGV using the M-MDS. (See ON-BOARD DIAGNOSTIC TEST .)
  4. Verify that the PID/DATA monitor item REGVP changes according to the regulating valve opening angle when the simulation item REGV is set from 0 % to 95 %.
scientia non olet · About LEMON Manuals