Function inspection
WARNING: This page is about a different variant/trim than selected.
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Display the PID OIL_TEMP. (See ON-BOARD DIAGNOSTIC TEST .) (See PCM INSPECTION .)
- Compare the voltage and temperature indications for the PID OIL_TEMP with the standard in the table indicated below.
- If they do not match the standard, perform the resistance inspection. (See RESISTANCE INSPECTION .)
Standard
RESISTANCE INSPECTIONOIL_TEMP V °C {°F} Approx. 3.02 Approx. 32 {89.6} Approx. 1.1 Approx. 94 {201.2}