LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2019 >> CX-5 Sport, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Control System (VIN 2)) >> Dosing Control Unit Inspection >> Using The M-MDS

Using The M-MDS

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • The dosing control unit terminal voltage vary with change in measuring conditions and vehicle conditions. Always carry out a total inspection of the input systems, output systems, and dosing control unit to determine the cause of trouble. Otherwise, diagnosis will be incorrect.
  1. Connect the M-MDS to the DLC-2.
  2. Switch the ignition ON (engine off).
  3. Measure the PID value.
    • If PID value is not within the specification, follow the instructions in Action column.
scientia non olet · About LEMON Manuals