LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2019 >> CX-5 Signature, 2.2L Eng VIN 2 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (VIN 2) >> Engine Oil Level Sensor Inspection >> PID/DATA Monitor Inspection

PID/DATA Monitor Inspection

  1. Verify that there is no engine oil leakage.
    • If there is any malfunction, repair or replace the malfunctioning part according to the inspection results.
  2. Inspect the engine oil level. (See ENGINE OIL LEVEL INSPECTION .)
  3. Switch the ignition ON (engine off).
  4. Access the PID/DATA monitor item EOL using the M-MDS. (See ON-BOARD DIAGNOSTIC TEST .)
  5. Verify that the PID EOL value and the engine oil amount measured using the oil level gauge are same.
G13119203Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals