Exhaust Manifold Bracket Installation Note

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Temporarily tighten the exhaust manifold bracket installation bolts.
Tighten the bolt in the order shown in the figure below.

Fig 1: Exhaust Manifold Bracket Bolts Tightening Sequence

Courtesy of MAZDA MOTORS CORP.

Tightening torque

38-51 N.m {3.9-5.2 kgf.m, 29-37 ft.lbf}