LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2019 >> 6 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Basic System - HVAC) >> Front Heat Duct Removal/Installation >> Driver's Side

Driver's Side

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver-side side wall. (See SIDE WALL REMOVAL/INSTALLATION .)
  2. Insert a Flathead screwdriver in the position shown in the figure below (1), lift it up in the direction of the arrow (2).
    Fig 1: Driver-Side Side Wall
    G12233484Courtesy of MAZDA MOTORS CORP.
  3. Detach the tab while lifting up the driver-side front heat duct in the direction of the arrow (3).
  4. Remove the driver-side front heat duct (4).
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals