LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2019 >> 6 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Automatic Transaxle System (Service Information) (GW6A-El)) >> Initial Learning >> Drive Learning >> Drive Learning Procedure

Drive Learning Procedure

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drive the vehicle under the following condition and operate shift up from 2nd to 3rd gear 4 times.
    • Engine warmed up completely
    • ATF temperature:60-110 °C {140-230 °F}
    • Accelerator pedal opening angle: Middle opening angle*1or more

    *1:Middle opening angle indicates40-60 %.

  2. Verify the shift shock when shift up is operated from 2nd to 3rd gear.
    • If the shift shock is the same on a model of the same type, end the drive learning.
    • If the shift shock is more than on a model of the same type, perform the drive learning again.
      • If the shift shock is more than on a model of the same type even if drive learning is repeated, repair the malfunctioning location following the applicable symptom troubleshooting procedure. (See SYMPTOM TROUBLESHOOTING ITEM TABLE .)
scientia non olet · About LEMON Manuals