Diagnostic Procedure
TRAFFIC SIGN RECOGNITION SYSTEM (TSR) ITEM DOES NOT APPEAR IN PERSONALIZATION MENU (TRAFFIC SIGN RECOGNITION SYSTEM) DIAGNOSTIC PROCEDURE
| Step | Inspection | Action | |
|---|---|---|---|
| 1 | VERIFY DTCs
|
Yes | Repair the malfunctioning location according to the applicable DTC troubleshooting. (See DTC TABLE [CONNECTIVITY MASTER UNIT]
.) (See DTC TABLE [FORWARD SENSING CAMERA (FSC)] .) |
| No | Go to the next step. | ||
| 2 | INSPECT PHENOMENON DUE TO DETECTION PERFORMANCE LIMITATIONS
|
Yes | The vehicle is normal. (Explain to the customer that the lane-keep assist system may not operate due to the detection performance limitations of the forward sensing camera (FSC).) Complete the symptom troubleshooting. |
| No | Go to the next step. | ||
| 3 | VERIFY DRIVING CONDITION
|
Yes | The vehicle is normal. (Explain to the customer that a traffic sign is not displayed because the operation of the Traffic Sign Recognition System (TSR) is canceled or depending on the driving conditions.) |
| No | Go to the next step. | ||
| 4 | INSPECT ACTIVE DRIVING DISPLAY
|
Yes | Go to the next step. |
| No | Replace the active driving display, then go to the next step. (See ACTIVE DRIVING DISPLAY REMOVAL/INSTALLATION .) |
||
| 5 | VERIFY MALFUNCTION SYMPTOM
|
Yes | Complete the symptom troubleshooting. (Explain repair contents to customer). |
| No | Repeat the diagnosis from Step 1. If the malfunction is not resolved, replace the forward sensing camera (FSC). (See FORWARD SENSING CAMERA (FSC) REMOVAL/INSTALLATION .) |
||