Diagnostic Assist Code "65" Switch Inspection

Input diagnostic assist code "65" according to the diagnostic assist code input procedure. (See Diagnostic Assist Code Input Procedure .)

Perform the steering switch inspection or commander switch inspection.

NOTE:

When the switch is operated, the switch operation content detected by the connectivity master unit (CMU) is displayed in the center display.
If the switch operation content previously detected is being displayed in the center display, newly detected content is added over it.

DIAGNOSTIC RESULT REFERENCE

Inspection	Display Of Center Display (Diagnostic Result)	Action
Launch the switch inspection mode. Operate each switch of the steering switch. Does the display in the center display correspond to each operation?	ST-SW Talk Button Pressed: TALK switch is pressed ST-SW Talk Button Released: TALK switch is released ST-SW Pick-Up Button Pressed: Pick-Up switch is pressed ST-SW Pick-Up Button Released: Pick-Up switch is released ST-SW Hang-Up Button Pressed: Hang-Up switch is pressed ST-SW Hang-Up Button Released: Hang-Up switch is released ST-SW Volume + Button Pressed: VOLUME (+) switch is pressed ST-SW Volume + Button Released: VOLUME (+) switch is released ST-SW Volume - Button Pressed: VOLUME (-) switch is pressed ST-SW Volume - Button Released: VOLUME (-) switch is released ST-SW See k + Button Pressed: See k (+) switch is pressed ST-SW See k + Button Released: See K (+) switch is released ST-SW See k - Button Pressed: See k (-) switch is pressed ST-SW See k - Button Released: See k (-) switch is released	Yes	The steering switch is normal.
		No	Inspect the steering switch. (See STEERING SWITCH INSPECTION .) If there is a malfunction: Replace the steering switch. (See STEERING SWITCH REMOVAL/INSTALLATION .) If the steering switch is normal: Replace the connectivity master unit (CMU). (See CONNECTIVITY MASTER UNIT (CMU) REMOVAL/INSTALLATION .)

DIAGNOSTIC RESULT REFERENCE

Inspection	Display Of Center Display (Diagnostic Result)	Action
Launch the switch inspection mode. Operate each button and knob of the commander switch. Does the display in the center display correspond to each operation?	Home Button Pressed: HOME button is pressed Home Button Released: HOME button is released Navi Button Pressed: NAV button is pressed Navi Button Released: NAV button is released Audio Button Pressed: AUDIO button is pressed Audio Button Released: AUDIO button is released Favorites Button Pressed: FAVORITE button is pressed Favorites Button Released: FAVORITE button is released Back Button Pressed: BACK button is pressed Back Button Released: BACK button is released Commander Pushed In: Commander knob is pressed Commander Released: Commander knob is released Tilt Up Pressed: Commander knob is tilted up Tilt Up Released: Commander knob is released from tilted up condition Tilt Right Pressed: Commander knob is tilted to the right Tilt Right Released: Commander knob is released from tilted right condition Tilt Down Pressed: Commander knob is tilted down Tilt Down Released: Commander knob is released from tilted down condition Tilt Left Pressed: Commander knob is tilted to the left Tilt Left Released: Commander knob is released from tilted left condition Commander Turned Clockwise: Commander knob is turned clockwise Commander Turned Counter Clockwise: Commander knob is turned counterclockwise Volume Knob Pushed In: Volume dial is pressed Volume Knob Released: Volume dial is released Volume Knob Turned Clockwise: Volume dial is turned clockwise Volume Knob Turned Counter Clockwise: Volume dial is turned counterclockwise	Yes	Commander switch is normal.
		No	Replace the commander switch. (See COMMANDER SWITCH REMOVAL/INSTALLATION .)

Cancel the diagnostic assist function according to the ending procedure. (See Ending Procedure .)