LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2019 >> 3 Preferred, 4D Hatchback, FWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Keyless Receiver Removal/Installation >> Sedan (4SD)

Sedan (4SD)

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)] .)
  2. Remove the following parts:
    1. C-pillar trim (LH) (See C-PILLAR TRIM REMOVAL/INSTALLATION .)
    2. Rear scuff plate (LH) (See REAR SCUFF PLATE REMOVAL/INSTALLATION .)
    3. Rear seat cushion (See REAR SEAT CUSHION REMOVAL/INSTALLATION .)
    4. Rear seat back (See REAR SEAT BACK REMOVAL/INSTALLATION .)
    5. Tire house trim (LH) (See TIRE HOUSE TRIM REMOVAL/INSTALLATION .)
  3. Disconnect the connector.
    Fig 1: Keyless Receiver Bolt With Torque Specification (Sedan (4SD))
    G13179090Courtesy of MAZDA MOTORS CORP.
  4. Remove the bolt.
  5. Remove the keyless receiver.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals