LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2019 >> 3 Base, 4D Hatchback, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Manual Transaxle System (Service Information)) >> Neutral Sensor Removal/Installation >> Neutral Sensor Installation Note

Neutral Sensor Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Clean neutral sensor and the neutral sensor installation hole.
    NOTE:
    • Do not apply manual transaxle oil to the O-ring.
  2. Apply manual transaxle oil to the neutral sensor installation hole.
  3. Install a new O-ring to neutral sensor.
  4. Install neutral sensor and the O-ring as a single unit.
scientia non olet · About LEMON Manuals