LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> MX-5 Miata Club, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System (Service Information) >> Steering Shift Switch Removal/Installation

Steering Shift Switch Removal/Installation

WARNING:
  1. Disconnect the negative battery cable and wait for 1 min or more. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION ).
  2. Remove the driver-side air bag module. (See DRIVER-SIDE AIR BAG MODULE Removal [STANDARD DEPLOYMENT CONTROL SYSTEM] ). (See DRIVER-SIDE AIR BAG MODULE Installation [STANDARD DEPLOYMENT CONTROL SYSTEM] ). (See DRIVER-SIDE AIR BAG MODULE Removal [TWO-STEP DEPLOYMENT CONTROL SYSTEM] ). (See DRIVER-SIDE AIR BAG MODULE Installation [TWO-STEP DEPLOYMENT CONTROL SYSTEM] ).
  3. Remove the steering wheel. (See STEERING WHEEL AND COLUMN Removal/Installation ).
  4. Disconnect the steering shift switch wiring harness connector.
    Fig 1: Identifying Steering Shift Switch Wiring Harness Connector
    G11279237Courtesy of MAZDA MOTORS CORP.
  5. Remove the screw.
    Fig 2: Identifying Steering Wheel Screws
    G11279242Courtesy of MAZDA MOTORS CORP.
  6. Disconnect the steering shift switch connector.
    Fig 3: Identifying Steering Shift Switch Connector
    G11279243Courtesy of MAZDA MOTORS CORP.
  7. Release the tab shown in the figure and remove the steering shift switch.
    Fig 4: Identifying Steering Shift Switch Connector And Tab
    G11279244Courtesy of MAZDA MOTORS CORP.
  8. Using a precision flathead screwdriver, release the tab.
    Fig 5: Identifying Column Cover Tabs
    G11279238Courtesy of MAZDA MOTORS CORP.
  9. Remove the steering wheel cover. (See STEERING WHEEL COVER Removal/Installation ).
  10. Remove the steering shift switch wiring harness from the steering wheel cover.
    Fig 6: Identifying Steering Shift Switch Wiring Harness From Steering Wheel Cover
    G11279246Courtesy of MAZDA MOTORS CORP.
  11. Install in the reverse order of Removal.