Oil Pump Installation Note

WARNING: This page is about a different car, the 2017 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.

Install the oil pump using the following procedure.
1. Temporarily tighten the three bolts shown in the figure.
  
  Fig 1: Oil Pump And Bolts
  Courtesy of MAZDA MOTORS CORP.
2. Tighten the two bolts shown in the figure to the specified torque.
  
  Fig 2: Oil Pump And Bolts
  Courtesy of MAZDA MOTORS CORP.
  NOTE:
  - The tightening order for the two bolts is optional.
  Tightening torque
  
  20-26 N.m {2.1-2.6 kgf.m, 15-19 ft.lbf}
3. Finally, tighten the bolt shown in the figure to the specified torque.
  
  Fig 3: Oil Pump And Bolt
  Courtesy of MAZDA MOTORS CORP.
  
  Tightening torque
  
  20-26 N.m {2.1-2.6 kgf.m, 15-19 ft.lbf}