Idle Speed Inspection
NOTE:
- The idle speed cannot be adjusted.
- The M-MDS is required to verify the idle speed.
- Complete the engine tune-up preparation. (See ENGINE TUNE-UP PREPARATION .)
- Verify that the idle speed (M-MDS PID: RPM) is within the specification using the PID/data monitor function of the M-MDS. (See PCM Inspection
.)
- If there is a malfunction, refer to "ENGINE SYMPTOM TROUBLESHOOTING". (See Symptom Diagnostic Index .)
Idle speed (P position or N position)
650-750 RPM