LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> CX-9 Signature >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Washer Motor Removal/Installation

Washer Motor Removal/Installation

NOTE:
  • If the procedure is performed with washer fluid in the washer tank, the washer fluid may leak out. When performing the procedure, place a container under the washer tank to collect washer fluid, and perform the procedure.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the front bumper. (See FRONT BUMPER REMOVAL .) (See FRONT BUMPER INSTALLATION .)
  3. Remove the washer tank. (See WASHER TANK REMOVAL/INSTALLATION .)
  4. Remove the washer motor in the direction of arrow (2) shown in the figure while moving it in the direction of arrow (1) shown in the figure.
    Fig 1: Removing Washer Motor
    G11432975Courtesy of MAZDA MOTORS CORP.
  5. Remove the grommet.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals