LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> CX-5 Touring, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 343 (Automatic Transaxle System (Service Information)) >> Initial Learning >> Drive Learning >> Drive learning procedure

Drive learning procedure

WARNING: This page is about a different car, the 2018 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drive the vehicle under the following condition and operate shift up from 2nd to 3rd gear 4 times.
    • Engine warmed up completely
    • ATF temperature: 60-110 °C {140-230 °F}
    • Accelerator pedal opening angle: Middle opening angle*1 or more

    *1: Middle opening angle indicates 40-60%.

  2. Verify the shift shock when shift up is operated from 2nd to 3rd gear.
    • If the shift shock is the same on a model of the same type, end the drive learning.
    • If the shift shock is more than on a model of the same type, perform the drive learning again.
    • If the shift shock is more than on a model of the same type even if drive learning is repeated, repair the malfunctioning location following the applicable symptom troubleshooting procedure. (See Symptom Troubleshooting Item Table .)
scientia non olet · About LEMON Manuals