LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> CX-5 Touring, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Technical Data - Engine >> Engine Technical Data >> Notes

Engine Technical Data: Notes

Item Specification
Idle speed [SKYACTIV-G 2.5 (WITH CYLINDER DEACTIVATION)] (ATX: P position or N position) 600-700 RPM
Ignition timing [SKYACTIV-G 2.5 (WITH CYLINDER DEACTIVATION)] Approx. BTDC 7°
CO concentration Within the regulation
HC concentration Within the regulation
Idle-up speed [SKYACTIV-G 2.5 (WITH CYLINDER DEACTIVATION)] (ATX: P position or N position) A/C on: 650-800 RPM
Electrical loads on: 600-750 RPM
OCV for No. 1 cylinder deactivation coil resistance 8.4-9.4 ohms [20°C {68°F}]
OCV for No. 4 cylinder deactivation coil resistance 8.4-9.4 ohms [20°C {68°F}]
OCV for hydraulic variable valve timing system coil resistance 6.9-7.5 ohms [20°C {68°F}]
Standard cylinder head bolt length 145.2-145.8 mm {5.717-5.740 in}
Maximum cylinder head bolt length 146.5 mm {5.767 in}
Front oil seal press on amount 0-1.0 mm {0-0.039 in} from edge surface of engine front cover
Rear oil seal press on amount 0-0.5 mm {0-0.019 in} from edge surface of cylinder block
Engine oil capacity (approx. quantity) Oil replacement: 4.3 L {4.5 US qt, 3.8 lmp qt}
Oil and oil filter replacement: 4.5 L {4.8 US qt, 4.0 lmp qt}
Total (dry engine): 5.5 L {5.8 US qt, 4.8 lmp qt}
Oil pressure (reference value) [oil temperature: 80-90°C {176-194°F}, [coolant temperature: 80-90°C {176-194°F}] Lo: 135-165 kPa {1.38-1.68 kgf/cm 2 , 19.6-23.9 psi} [1, 500 RPM]
Hi: 225-275 kPa {2.30-2.80 kgf/cm 2 , 32.7-39.8 psi} [4, 500 RPM]
Engine coolant capacity (approx. quantity) 7.4 L {7.8 US qt, 6.5 lmp qt}
Cooling system cap valve opening pressure 93.2-122.6 kPa {0.951-1.250 kgf/cm 2 , 13.6-17.7 psi}
Cooling fan motor No. 1, No. 2 standard current 4.5-8.5 A [12 V]
Throttle body resistance 0.3-100 ohms [20°C {68°F}]
Fuel pressure 405-485 kPa {4.13-4.94 kgf/cm 2 , 58.8-70.3 psi}
Fuel hold pressure 230 kPa {2.35 kgf/cm 2 , 33.4 psi} or more
Fuel injector resistance 1.34-1.64 ohms [20°C {68°F}]
Exhaust shutter valve resistance 0.3-100 ohms [20°C {68°F}]
Battery parasitic draw (When the ignition is off (key is removed), all doors and the bonnet are closed.) 25-45 mA
Firing order 1-3-4-2 (all cylinders independent firing)
G12189746
Spark plug type PE5R-18-110, PE5S-18-110
Spark plug gap Standard: 1.05-1.40 mm {0.0414-0.0551 in}
New spark plug (reference): 1.05-1.15 mm {0.0414-0.0452 in}
Spark plug resistance [25°C {77°F}] 3.0-7.5 kilohms
Starter no-load test voltage 11 V
Starter no-load test current 90 A or less