LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> CX-5 Touring, FWD >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Active Driving Display Removal/Installation >> Replacing Active Driving Display As Single Component

Replacing Active Driving Display As Single Component

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:

    (1) Meter Hood (See METER HOOD REMOVAL/INSTALLATION .) (2) Upper column cover (See COLUMN COVER REMOVAL/INSTALLATION .) (3) Instrument cluster (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION .)

  3. Remove the screws.
    Fig 1: Locating Active Driving Display Screws
    G11427777Courtesy of MAZDA MOTORS CORP.
  4. Pull the active driving display outward.
    Fig 2: Pulling Active Driving Display Outward
    G11427778Courtesy of MAZDA MOTORS CORP.
  5. Disconnect the connector.
    Fig 3: Locating Active Driving Display Connector
    G11427779Courtesy of MAZDA MOTORS CORP.
  6. Remove the active driving display.
  7. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals