LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> CX-5 Touring, FWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Systems >> Fuse Block Removal/Installation >> Removal

Fuse Block Removal/Installation: Removal

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:

    (1)Font scuff plate (LH) (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .) (2)Front side trim (LH) (See FRONT SIDE TRIM REMOVAL/INSTALLATION .) (3)LF control unit (with advanced keyless entry system) (See LF CONTROL UNIT REMOVAL/INSTALLATION .)

  3. Remove all the fuses.
  4. Remove the bolt.
    Fig 1: Removing Fuse Block Bolt
    G11426322Courtesy of MAZDA MOTORS CORP.
  5. Remove the fuse block clip from the body.
  6. Remove the cover.
    Fig 2: Removing Fuse Block Clip From Body
    G11426323Courtesy of MAZDA MOTORS CORP.
  7. Disconnect the connector.
    Fig 3: Disconnecting Connector
    G12189805Courtesy of MAZDA MOTORS CORP.
  8. Set the removed fuse block aside so that it does not scratch the vehicle and parts.
scientia non olet · About LEMON Manuals