LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> CX-5 Touring, FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System (Service Information) >> DSC HU/Control Module Removal/Installation [SKYACTIV-G 2.5 (VIN M)] >> DSC HU/Control Module Connector Installation Note

DSC HU/Control Module Connector Installation Note

  1. Connect the connector and pull the lock lever up in the direction of the arrow.
    Fig 1: Pulling Lock Lever Up
    G11426987Courtesy of MAZDA MOTORS CORP.
  2. After connecting the connector, verify that the connector cover is completely pushed in.
scientia non olet · About LEMON Manuals