LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> CX-5 Touring, FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System (Service Information) >> DSC HU/Control Module Inspection >> Notes

DSC HU/Control Module Inspection: Notes

  1. Disconnect the DSC HU/Control Module connector. (See DSC HU/Control Module REMOVAL/INSTALLATION [SKYACTIV-G 2.5 (WITH CYLINDER DEACTIVATION)] .)
  2. Connect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  3. Attach the tester lead to the DSC HU/Control Module wiring harness-side connector and inspect voltage, continuity, or resistance according to the standard (reference) on the table.
scientia non olet · About LEMON Manuals