LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> CX-5 Touring, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 356 (Drive Selection System) >> Drive Selection Switch Removal/installation

Drive Selection Switch Removal/installation

WARNING: This page is about a different car, the 2018 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the selector lever knob. (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .)
  3. Remove the shift panel. (See SHIFT PANEL REMOVAL/INSTALLATION .)
  4. Turn over the removed shift panel and remove the boots from the boots securing parts shown in the figure.
    Fig 1: Shift Panel And Boots Securing Parts
    G11436214Courtesy of MAZDA MOTORS CORP.
  5. Remove in the order indicated in the table.
  6. Install in the reverse order of removal.
    Fig 2: Drive Selection Switch, Connector And Screw
    G12245181Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals