LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> CX-5 Touring, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 298 (Security And Locks) >> Push Button Start Inspection >> Continuity Inspection

Continuity Inspection

WARNING: This page is about a different car, the 2018 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .)
    2. Passenger-side decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION .)
    3. Upper column cover (See COLUMN COVER REMOVAL/INSTALLATION .)
    4. Driver-side decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION .)
    5. Meter hood (See METER HOOD REMOVAL/INSTALLATION .)
    6. Push button start (See PUSH BUTTON START REMOVAL/INSTALLATION .)
  3. Verify that the continuity between the push button start terminals is as indicated in the table.
    Fig 1: Push Button Start Terminals Continuity Reference Chart
    G11273555Courtesy of MAZDA MOTORS CORP.
    Fig 2: Checking Continuity Between Push Button Start Terminals
    G11426643Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals