LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> CX-3 Touring, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 170 (Engine Starting System) >> Starter Inspection >> On-vehicle Inspection >> Notes

On-vehicle Inspection: Notes

WARNING: This page is about a different car, the 2018 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that the battery is fully charged. (See BATTERY INSPECTION .)
  2. The starter is normal if it rotates smoothly and without any noise when the engine is cranked.
    • If the starter does not operate, inspect the following:
      • Remove the starter, and inspect the starter unit.
      • Inspect the related wiring harnesses, the ignition switch, and the transaxle range switch.