Airflow Mode Main Link Removal
WARNING: This page is about a different car, the 2018 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
- Remove the following parts:
(1) Passenger-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .) (2) Passenger-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION .) (3) Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .) (4) Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION .) (5) Lower decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION .) (6) Passenger-side lower panel (See LOWER PANEL REMOVAL/INSTALLATION .) (7) Passenger-side front heat duct (See FRONT HEAT DUCT REMOVAL/INSTALLATION .)
- Disconnect the connector.
- Remove the screws.
- Remove the airflow mode actuator.
- Remove the airflow mode main link.