LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> CX-3 Touring, FWD >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Engine Starting System >> Starter Removal/Installation >> Starter Installation Note

Starter Installation Note

CAUTION:
  • Do not overlap the starter with the end plate (area A shown in figure) when installing. If the starter is not correctly installed, the nut installed to the drive plate may contact the end plate causing abnormal noise.
Fig 1: Cautions For Not Overlapping Starter With End Plate
G11437442Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals