LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> CX-3 Touring, FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System (Service Information) >> TCS Off Switch Inspection

TCS Off Switch Inspection

  1. Remove the TCS OFF switch. (See TCS OFF SWITCH REMOVAL/INSTALLATION .)
  2. Verify that the resistance between the TCS OFF switch terminals B and C is as indicated in the table.
    • If not as indicated in the table, replace the TCS OFF switch.
    Fig 1: Checking Resistance Between TCS Off Switch Terminals B And C
    G09075258Courtesy of MAZDA MOTORS CORP.

    TCS OFF switch specification 

    Terminal Test condition Resistance (ohms)
    B-C Switch pressed 0
    Switch released 1139.99-1163.01
  3. Apply battery voltage to TCS OFF switch terminal J, and connect terminal I to ground.
  4. Verify that the LED illuminates.
    • If there is any malfunction, replace the TCS OFF switch.
scientia non olet · About LEMON Manuals