LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> CX-3 Touring, FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System (Service Information) >> Auto Hold Switch Inspection >> Continuity Inspection

Continuity Inspection

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION )
  2. Remove the electric parking brake switch. (See ELECTRIC PARKING BRAKE SWITCH REMOVAL/INSTALLATION )
  3. Verify that the continuity is as indicated in the table.
    Fig 1: Electric Parking Brake Switch Connector Terminals
    G11426969Courtesy of MAZDA MOTORS CORP.
    Fig 2: Electric Parking Brake Switch Connector Terminals Continuity Chart
    G11426970Courtesy of MAZDA MOTORS CORP.
    • If not as indicated in the table, replace the electric parking brake switch.