DTC U2300-55; Instrument Cluster Configuration Not Implemented: Notes

DTC U2300-55; INSTRUMENT CLUSTER CONFIGURATION NOT IMPLEMENTED - DETECTION CONDITION & POSSIBLE CAUSE

Description	Instrument cluster configuration not implemented
Detection condition	The BCM does not perform the configuration with the ignition switched ON (engine off or on).
Fail-safe	Not applicable
Possible cause	NOTE: To correctly write the configuration data sent from the instrument cluster to the BCM to the BCM, 30 s or more need to have elapsed since the ignition was switched ON (engine off or on). Instrument cluster configuration is not completed. BCM malfunction
System wiring diagram	Not applicable