LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> CX-3 Touring, AWD >> Repair and Diagnosis >> Steering >> Electronic Steering >> Electric Power Steering System >> Intermediate Shaft Removal/Installation >> Intermediate Shaft Removal Note

Intermediate Shaft Removal Note

  1. Place an alignment mark across the break between the steering column and the yoke for the intermediate shaft as shown in the figure.
    Fig 1: Placing Alignment Mark Break Between Steering Column And Intermediate Shaft
    G11438027Courtesy of MAZDA MOTORS CORP.
  2. Place alignment marks on the steering gear (pinion) and the intermediate shaft as shown in the figure.
    Fig 2: Placing Alignment Marks On Steering Gear (Pinion) And Intermediate Shaft
    G11438028Courtesy of MAZDA MOTORS CORP.
  3. Remove in the order of joint bolt A and joint bolt B.
    Fig 3: Removing Joint Bolt A And Joint Bolt B
    G11438029Courtesy of MAZDA MOTORS CORP.
  4. Remove the intermediate shaft.
scientia non olet · About LEMON Manuals