Selection Of Procedure For Immobilizer System-related Parts Programming

WARNING: This page is about a different car, the 2018 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

Verify that the ROOM fuse, AT fuse, and SRS2/ESCL fuse are installed.

Select the applicable programming procedure from the service content of the immobilizer system-related parts.

PROGRAMMING PROCEDURE TYPES FOR IMMOBILIZER SYSTEM-RELATED PARTS DESCRIPTION

No.

Service

Programming Procedure

When programming additional remote transmitter ⁽¹⁾

(See No. 1 Additional Remote Transmitter Programming Procedure (Using the M-MDS) .)

When PCM is replaced

(See No. 2 Programming Procedure After PCM Replacement .)

When start stop unit is replaced
When PCM and start stop unit are replaced simultaneously

(See No. 3 Programming Procedure When Start Stop Unit Is Replaced Or When Start Stop Unit And Pcm Are Replaced Simultaneously .)

When remote transmitter is replaced
When remote transmitter is lost

(See No. 4 Procedure For Remote Transmitter Clearing And Newly Programming .)

⁽¹⁾	Have a remote transmitter that can start the engine.