LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> CX-3 Touring, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (Interior Trim) >> Liftgate Side Trim Removal/Installation >> Installation

Liftgate Side Trim Removal/Installation: Installation

WARNING: This page is about a different car, the 2018 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the fastener and the hook of the liftgate side trim, press the liftgate side trim in the direction of the arrow shown in the figure, and install the clips to the liftgate.
    Fig 1: Pressing Liftgate Side Trim In Direction
    G12266460Courtesy of MAZDA MOTORS CORP.
  2. Press the liftgate side trim in the direction of the arrow shown in the figure and install the hook and the tab to the liftgate lower trim.
    Fig 2: Pressing Liftgate Side Trim
    G11434561Courtesy of MAZDA MOTORS CORP.
  3. Press the liftgate side trim in the direction of the arrow shown in the figure and install the tab to the liftgate lower trim.
    Fig 3: Pressing Liftgate Side Trim In Direction
    G12266462Courtesy of MAZDA MOTORS CORP.
  4. Install the fastener.
  5. Install the liftgate upper trim. (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
scientia non olet · About LEMON Manuals