Upper Radiator Hose Installation Note

WARNING: This page is about a different car, the 2018 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

Install the upper radiator hose using the following procedure:
1. Tighten the bolt shown in the figure.
  
  Fig 1: Upper Radiator Hose, Coolant Control Valve And Bolt
  Courtesy of MAZDA MOTORS CORP.
  
  Tightening torque
  
  8-10 N.m {82-101 kgf.cm, 71-88 in.lbf}
2. Connect the upper radiator hose to the coolant control valve so that the projection position is aligned with the mark.
  
  Fig 2: Mark On Upper Radiator Hose
  Courtesy of MAZDA MOTORS CORP.