LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> CX-3 Touring, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Doors And Liftgate) >> Power Liftgate (PLG) Drive Unit Removal/Installation >> Power Liftgate (PLG) Drive Unit Installation Note

Power Liftgate (PLG) Drive Unit Installation Note

WARNING: This page is about a different car, the 2018 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. If the power liftgate (PLG) drive unit is to be reused, perform the following procedure.

    (1)Remove the packing remaining on the power liftgate (PLG) drive unit.

    Fig 1: Removing Packing On Power Liftgate (PLG) Drive Unit
    G11425970Courtesy of MAZDA MOTORS CORP.

    (2)Adhere new packing to the position shown in the figure.

scientia non olet · About LEMON Manuals