DTC C0061-54, C0062-54, C0063-54: DSC HU/Control Module System (Unperformed Initialization Procedure): Notes

WARNING: This page is about a different car, the 2018 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

DTC C0061:54/C0062:54/C0063:54 (DYNAMIC STABILITY CONTROL) DETECTION CONDITION AND POSSIBLE CAUSE

DTC	C0061:54, C0062:54, C0063:54	DSC HU/Control Module System (Unperformed Initialization Procedure)
DETECTION CONDITION		C0061:54 DSC HU/Control Module detects that the initialization procedure has not been performed. (Lateral acceleration sensor) C0062:54 DSC HU/Control Module detects that the initialization procedure has not been performed. (Longitudinal acceleration sensor) C0063:54 DSC HU/Control Module detects that the initialization procedure has not been performed. (Yaw rate sensor)
FAIL-SAFE FUNCTION		Refer to "DTC Table" and "Fail-safe Function Malfunction Contents". (See DTC TABLE (Dynamic Stability Control (DSC)) .)
POSSIBLE CAUSE		Initialization procedure for the lateral acceleration sensor, longitudinal acceleration sensor or yaw rate sensor not performed SAS control module malfunction DSC HU/Control Module malfunction
SYSTEM WIRING DIAGRAM		-