LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> CX-3 Touring, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Engine Mechanical) >> Plug Hole Plate Removal/Installation >> Notes

Plug Hole Plate Removal/Installation: Notes

WARNING: This page is about a different car, the 2018 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • If the rubber on only one side of the plug hole plate front is lifted up, it could damage the rear adapters shown in the figure. When removing the plug hole plate, lift up the rubber at the front of the plug hole plate at the same time.
    Fig 1: Caution - If Rubber On Only One Side Of Plug Hole Plate Front Lifted Up, It Could Damage Adapter
    G12188651Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals