LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> CX-3 Touring, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Engine Mechanical) >> Plug Hole Plate Removal/Installation >> Installation

Plug Hole Plate Removal/Installation: Installation

WARNING: This page is about a different car, the 2018 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press the plug hole plate in the order shown in the figure to insert the adapter to the rubber on the engine side.
    Fig 1: Inserting Adapter To Rubber On Engine Side
    G12188654Courtesy of MAZDA MOTORS CORP.
  2. Press the front part of the plug hole plate at the same time to insert the rubber to the adapter on the engine side.
    Fig 2: Inserting Rubber To Adapter On Engine Side
    G12188655Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals