Replacing Combiner

WARNING: This page is about a different car, the 2018 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
Remove the following parts:
(1) Meter Hood (See METER HOOD REMOVAL/INSTALLATION .) (2) Upper column cover (See COLUMN COVER REMOVAL/INSTALLATION .) (3) Instrument cluster (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION .) (4) Active driving display (See Replacing active driving display as single component .)
Lift up the cover hook in the direction of arrow (1) shown in the figure, move it in the direction of arrow (2), and detach the cover hooks from the active driving display.

Fig 1: Detaching Cover Hooks From Active Driving Display
Courtesy of MAZDA MOTORS CORP.
Lift up the cover hook in the direction of arrow (1) shown in the figure, move it in the direction of arrow (2), and detach the cover hooks from the active driving display.

Fig 2: Pressing Active Driving Display Cover Hook
Courtesy of MAZDA MOTORS CORP.
Remove the screws.

Fig 3: Removing Active Driving Display Screw
Courtesy of MAZDA MOTORS CORP.
Remove the bracket.

Fig 4: Removing Active Driving Display Bracket
Courtesy of MAZDA MOTORS CORP.
Remove the combiner.

Fig 5: Removing Active Driving Display Combiner
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.