Solar Radiation Sensor Inspection (Auto A/C)

WARNING: This page is about a different car, the 2018 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
Remove the center speaker grille. (See SPEAKER GRILLE REMOVAL/INSTALLATION .)
Remove the solar radiation sensor. (See SOLAR RADIATION SENSOR REMOVAL/INSTALLATION (Auto A/C) .)
Shine a fluorescent light or expose the solar radiation sensor to natural sunlight.
Connect the positive (+) lead to terminals A and negative (-) lead to terminal B, C of the solar radiation sensor, and verify that the voltage value is output.

Fig 1: Checking Solar Radiation Sensor Voltage
Courtesy of MAZDA MOTORS CORP.
- If the voltage is 0 V, replace the solar radiation sensor. (See SOLAR RADIATION SENSOR REMOVAL/INSTALLATION (Auto A/C) .)