Blower Fan Controller Removal/Installation

WARNING: This page is about a different car, the 2018 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
Remove the following parts:
(1) Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .) (2) Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION .)
Disconnect the blower fan controller connector.

Fig 1: Blower Fan Controller Connector
Courtesy of MAZDA MOTORS CORP.
Rotate the blower fan controller (2) while pressing the tab (1).

Fig 2: Rotating Blower Fan Controller
Courtesy of MAZDA MOTORS CORP.
Remove the blower fan controller.

Fig 3: Removing Blower Fan Controller
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.