DTC B10AD-56; Auto Light Sensitivity Mismatch: Notes
DTC B10AD-56; AUTO LIGHT SENSITIVITY MISMATCH - DETECTION CONDITION & POSSIBLE CAUSE
| Description |
Auto light sensitivity mismatch |
| Detection condition |
- The BCM received the following mismatches for 5 s or more with the ignition switched ON (engine off or on).
- Auto light sensitivity setting required by BCM to set auto light sensor/rain sensor
- Current value of auto light sensitivity setting which auto light sensor/rain sensor sends to BCM
|
| Fail-safe |
Auto light system
- Continue the controls prior to the auto light malfunction detection.
|
| Possible cause |
- Auto light sensor/rain sensor malfunction
- BCM malfunction
|
| System wiring diagram |
Not applicable |