LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> CX-3 Sport, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 268 (On-Board Diagnostic - Rear Body Control Module (RBCM)) >> DTC B1207-09: Error Signal Received From SAS Control Module >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2018 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
DTC B1207:09 (REAR BODY CONTROL MODULE) DIAGNOSTIC PROCEDURE

Step Inspection Action
1 VERIFY REAR BODY CONTROL MODULE (RBCM) DTCs AGAIN Yes Go to the next step.
No Go to Step 4.
2 VERIFY SAS CONTROL MODULE DTCs Yes Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
(See DTC TABLE [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)] .)
(See DTC TABLE [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)] .)
No Go to the next step.
3 VERIFY IF MALFUNCTIONING LOCATION IS SAS CONTROL MODULE DEPENDING ON REPEATABILITY Yes Replace the SAS control module, then go to the next step.
(See SAS CONTROL MODULE REMOVAL/INSTALLATION [STANDARD DEPLOYMENT CONTROL SYSTEM] .)
(See SAS CONTROL MODULE REMOVAL/INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM] .)
No Go to the next step.
4 VERIFY IF OTHER DTCs DISPLAYED
  • Are any other DTCs displayed?
Yes Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
(See DTC TABLE (Rear Body Control Module (RBCM)) .)
No DTC troubleshooting completed.