DTC C101F-98: Overheat Protection Control: Notes

WARNING: This page is about a different car, the 2018 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.

DTC C101F:98 (DSC HU/CONTROL MODULE) DETECTION CONDITION AND POSSIBLE CAUSE

DTC	C101F:98	Overheat Protection Control
DETECTION CONDITION		Pump motor, traction control solenoid valve and stability control solenoid valve is forcibly operated for 30 s or more is detected. Inlet solenoid valve is forcibly operated for 120 s or more and outlet solenoid valve is forcibly operated for 30 s or more is detected.
FAIL-SAFE FUNCTION		Refer to "Fail-safe function table". (See DTC TABLE (DSC HU/CONTROL MODULE) .)
POSSIBLE CAUSE		Overheating protection control is performed to protect solenoid valve inside DSC HU/Control Module, however, this is not a malfunction
SYSTEM WIRING DIAGRAM		-