Foot Support Removal/Installation

WARNING: This page is about a different car, the 2018 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

Remove the following parts:
(1) Passenger-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .) (2) Passenger-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION .) (3) Side wall (See SIDE WALL REMOVAL/INSTALLATION .)
Partially peel back the floor covering.
Remove the fastener.
Without 360° view monitor control module

Fig 1: Removing Foot Support Fastener (Without 360° View Monitor Control Module)
Courtesy of MAZDA MOTORS CORP.

With 360° view monitor control module

Fig 2: Removing Foot Support Fastener (With 360° View Monitor Control Module)
Courtesy of MAZDA MOTORS CORP.
Remove the foot support in the direction of the arrow shown in the figure.
Without 360° view monitor control module

Fig 3: Removing Foot Support (Without 360° View Monitor Control Module)
Courtesy of MAZDA MOTORS CORP.

With 360° view monitor control module

Fig 4: Removing Foot Support (With 360° View Monitor Control Module)
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.