Diagnostic Procedure
DTC C101F-98; OVERHEAT PROTECTION CONTROL DIAGNOSTIC PROCEDURE
| Step | Inspection | Action | |
|---|---|---|---|
| 1 | VERIFY DSC HU/CM DTC
|
Yes | Replace the DSC HU/CM, then go to the next step. (See DSC HU/CM REMOVAL/INSTALLATION .) |
| No | Go to the next step. | ||
| 2 | VERIFY NO DTC IS PRESENT
|
Yes | Go to the applicable DTC inspection. (See DTC TABLE [DSC HU/CM] .) |
| No | DTC troubleshooting completed. | ||