LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> 6 Signature >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System (VIN Y) >> After Service Precaution >> Fuel Leakage Inspection >> Using M-MDS

Using M-MDS

  1. Connect the M-MDS to the DLC-2.
  2. Using the simulation function "FP", start the fuel pump. (See ON-BOARD DIAGNOSTIC TEST .)
  3. Verify that there is no fuel leakage from the serviced parts.
  4. In the case of fuel leakage, replace the following components and then recheck using the fuel leakage checking procedure.
    • If there is leakage, replace the fuel hoses and clips.
    • If there is damage on the seal on the fuel pipe side, replace the fuel pipe.
scientia non olet · About LEMON Manuals